Packaging Details
- Unit Type: piece
- Package Weight: 0.5kg (1.10lb.)
- Package Size: 29cm x 10cm x 5cm (11.42in x 3.94in x 1.97in)
ow.productDescripti
DSE702 Controller Free Shipping Made in China (DSE701,DSE703,DSE704)
Website:
TECHNICAL PARAMETER
DC Supply:
8 to 35 V Continuous.
Cranking Dropouts:
Able to survive voltage dips during cranking. This is achieved without the need for internal batteries.
Alternator Input Range:
15 - 305 V AC RMS (+20%)
Alternator Input Frequency:
50 - 60 Hz at rated engine speed.(Minimum 75V AC)
Overspeed: nominal frequency +14%(+24% Overshoot)
Start Output:
Solid State 1.2A negative grounding terminal
Run Output:
Solid State 1.2A negative grounding terminal
Pre-heat Output:
Solid State1.2A negative grounding terminal
Dimensions:
72mm X 72mm X 38mm
(2.83” x 2.83” x 2.5”) (Excluding Keyswitch) Cut-out 68mm x 68mm (2.68” x 2.68”)
Operating Temperature Range: -30 to +70°C
Installation:
Front panel mounting via suitable cutout.Retaining clips supplied. Cable connections via screw clamp typeterminals
Calibration:
Speed trip setting switch accessible from rear of module.
Replacement for DSE701
Description:
1)The model 701/702 is an Engine control module designed to control the engine via a key switch and pushbuttons on the front panel.The module is used to start and stop the engine and indicate fault conditions,automatically shutting down the engine and indicating the cause of failure by LED,giving true,first up fault annunciation.
Additionally,the Autostart versions of the controller will respond to a remote switched input to begin the start sequence.
2)Model 702 has integral tamperproof LCD hours run counter to indicate total engine run time.
Safe Testing ---Voltage, Hz,Amps,overload,etc of Generator
Parallel Control for Generators in Workshop
↑Working for Parallel Cabinet Controller
`;