Packaging Details - Unit Type:piece
- Package Weight:0.035kg (0.08lb.)
- Package Size:10cm x 10cm x 5cm (3.94in x 3.94in x 1.97in)
Packaging Details - Unit Type:piece
- Package Weight:0.035kg (0.08lb.)
- Package Size:10cm x 10cm x 5cm (3.94in x 3.94in x 1.97in)
tyle="clear:both"> 1pc TMC2208 Tester With Stackable Headers Test Or Flash Parameter Modes Of TMC2208 Operation On USB To Serial Adapter With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter. The adapter comes with stackable headers, so you can use it direct on your 3D printer board, e.g. on a Ramps like the photo shows. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed). With this TMC2208 tester ,you can change the parameter and modes of TMC2208. Note: 1.You need to make some application for the driver before using the tmc2208 tester,pls see the picture.If you don\`t have the tool to do it,pls choose the tester with solder tmc2208 2.if you need TMC2208 Tester with TMC2208,Pls click the link https://www..com/item/1pc-TMC2208-Tester-With-Stackable-Headers-Test-Or-Flash-Parameter-Modes-Of-TMC2208-Operation-On-USB/32852670557.html Package: 1pc TMC2208 Tester 1pc USB With the TMC2208 Configurator you can change the settings and program the OTP (One-Time-Programmable) memory of a Trinamic TMC2208 via the UART interface. To run the program: - Install
- Download
- Start the file with the ScriptCommunicator: ScriptCommunicator TMC2208.scez
- Choose the right serial port and click
- Modifications in the Configurator are directly transmitted
- Notes:
- The OTP bits can be programmed only one time.
- If you enable then cannot be (null).
-
Hardware Connection You can use every RS232 serial adapter with 0-5V logic levels (e.g. FTDI-Breakout) and the SilentStepStick Tester/Programmer can be used as connection adapter. Note: The jumper next to the PDN_UART pin has to be closed on the TMC2208 SilentStepStick to enable the pin access via the pin header. Screenshot -->
|