Packaging Details
- Unit Type:piece
- Package Weight:0.05kg (0.11lb.)
- Package Size:10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
1.Product Features:1.SatisfyUL.CEClaim,
2.Slim.Subminiature
2. Input voltage (90 ~ 264Vac)
3. Low Ripple.lownoise
4. Output overload and short circuit protection
5. High efficiency high power density
6. Products designed to meetEMCAnd safety testing requirements
7. Low power consumption. Green . Load loss\\u003c0.1W
8.100%Aging and load test
2. Environmental conditions
item Head Title | Technical Specifications | single Location |
Operating temperature | -20- + 60 | ° |
Storage temperature | -40- + 80 | ° |
Relative humidity | 5-95 | % |
Cooling | Natural cooling | |
Atmospheric pressure | 80-106 | Kpa |
Altitude | ≤2000 | m |
vibration | Vibration coefficient10 ~ 500Hz, 2G10min. / 1cycle, 60min.each along X, Y, Z axes | |
3. Electrical Characteristics
1. Input characteristics ( At room temperature testing).
item Head Title | skills requirement | single Location |
Rated input voltage | 100-240 | VAc |
Input voltage range | 90-264 | VAc |
Maximum input current | ≤0.2 | A |
Input inrush current | ;≤10 | A |
The maximum input voltage | ≤270 | VAc |
Enter slow start | ≤50 | mS |
Input Low Voltageeffectiveness | Vin=110VAc, Full load ≥69 | % |
Input High Voltageeffectiveness | Vin=220VAc, Full load ≥70 | % |
Long-term reliability | MTBF≥100,000 | h |
Load rated output voltage | + 5 ± 0.1 | VDc |
Full rated output voltage | + 5 ± 0.2 | VDc |
Maximum output current short | ≥1000 | mA |
The maximum output current for a long time | ≥600 | mA |
Voltage Regulation | ± 0.2 | % |
Load Regulation | ± 0.5 | % |
Output ripple and noise (mVp-p) | ≤50 Rated input voltage, output at full load . With 20MHz of bandwidth , Load side and 10uF and 0.1uF capacitor to be tested. | mV |
Switch Overshoot | ( Rated input voltage ,Output plus 10%Load ) ≤5 | % VO |
Output overcurrent protection | 150-200 % of the output maximum load | A |
Output short circuit protection | Direct short circuit the normal output, automatically resume normal operation after a short circuit removal | |
4 .Safety features:
4.1Products designed to meet UL.CE safety certification requirements.
4.2Safety and electromagnetic compatibility
The input design usesULAuthenticate0.5AInsurance;
PCBBoard using double-sided copper-clad plate production, material fire rating94-V0level;
Safety standards complianceUL1012, EN60950, UL60950
Insulation voltageI / P-O / P: 2500VAC
Insulation resistanceI / P-O / P\\u003e 100M Ohms / 500VDC 25°70% RH
Conduction and radiation accordEN55011, EN55022 (CISPR22)
Electrostatic dischargeIEC / EN 61000-4-2 level 4 8kV / 15kV
RF Radiated ImmunityIEC / EN 61000-4-3See Application Note
4.3Temperature Safety Design
At room temperature, the inner surface temperature of the power supply capacitor main converter , etc. does not exceed the maximum90°;
Maximum housing surface temperature does not exceed60°;
5. Flag Packaging Transportation . Storage
5.1 mark
5.1.1 Product Marking
In place of products labeled with signs , it complies with the national standards . Industry standards.
5.1.2 Package mark
Products marked with the manufacturer\`s name on the box Zip Model factory site on the day . . . . . . ;
Marked \\" up .\\" \\" Moisture\\" \\" Handle with care \\" and other transportation signs, all signs are in line with GB 191 of Regulation
set.
5.2 Packaging
Products are separated using special plastic box packaging, with anti-vibration function , and in accordance with the provisions of GB 3873 .
5.3 Transport Packaged products can be in any vehicle transport , in transport should be awnings, there should be no
Severe vibration , impact, etc.
5.4 . Storage Product storage shall comply with the provisions of GB 3873 .
6. Weight and Dimensions:
-->