In the hardware specifications, Odroid-C1 ratio not to upgrade the raspberry pie more attractive and more power. Odroid-C1 built within a 1.5 GHz quad core Amlogic processor, built-in GPU Mali-450, 1GB memory, support eMMC or microSD card, there are 5 USB 2 ports, support OTG, support HDMI video and audio. There is a Gigabit Ethernet port that supports the 720pUSB camera.
Odroid-C1 size is only 85x56 mm in size and identical raspberry pie.
Odroid-C1\'s advantage is that the input / output pin compatible with raspberry pie. The compatible capacity means Odroid-C1 and for raspberry pie developed a variety of sensors, compatible connectors and other equipment, which will attract more users from raspberry pie migrated to Odroid-C1, because most of the software and hardware in the Odroid-C1 out of the box is used.
ODROID-C1+
Is the ODROID-C1+ esteemed to be the most powerful low-cost single board computer available and, as well as being an extremely versatile device. Featuring a quad-core AMLOGIC processor and advanced Mali GPU, and Gigabit Ethernet, it can function as a home theater set-top box, a general purpose computer for web browsing, gaming and socializing, a compact tool for college or office work, a prototyping device for hardware tinkering, a controller for home automation and a workstation for software development, and much more.
Some of the modern operating systems that run on the ODROID-C1+ are Ubuntu, Android, Fedora, ARCHLinux, Debian, and OpenELEC, with thousands of free open-source software packages available. The ODROID-C1+ is an arm device -- the most widely used architecture for mobile devices and embedded 32-bit computing. The arm processor \'s small size, reduced complexity and low power consumption makes it very suitable for) devices such as "wearables" from its name and embedded controllers.
* Amlogic ARM Cortex -A5 (ARMv7) 1.5Ghz quad core CPUs
* Mali -450 MP2 GPU (OpenGL ES 2.0/1.1 enabled for Linux and Android)
* DDR3 SDRAM 1Gbyte
* Ethernet Gigabit
* GPIOs 40pin + I2S 7pin
* HS200 Flash Storage slot UHS-1 SDR50 MicroSD Card slot eMMC4.5
* Host 2 x USB 4, OTG x data 1 (power + capable USB)
* Infrared (IR) Receiver
* or Android OS Ubuntu
C1+ is the latest The revision of the original C1.
Replaced the original C1 It in July Compared 2015 to the C1 it has:
- Type-A HDMI connector Standard
- included heat sink on board An
- I2S bus to support An HiFi audio add-on boards
- function that doesn\'t require CEC the RTC backup battery
- power path from USB OTG A port as well as DC barrel connector
- SD-card compatibility Improved
* additional MicroSD card or An eMMC an is module to required the install OS. We recommend the eMMC module as it has much higher performance than standard MicroSD cards..
Be careful
1:ODROID-C1+ to establish the operating system requires card or an eMMC module MicroSD;
2:ODROID-C1 + requires an external power supply, Micro-USB is only used for data communication, not as a power supply port;