Packaging Details - Unit Type:piece
- Package Weight:0.045kg (0.10lb.)
- Package Size:6cm x 6cm x 4cm (2.36in x 2.36in x 1.57in)
Packaging Details - Unit Type:piece
- Package Weight:0.045kg (0.10lb.)
- Package Size:6cm x 6cm x 4cm (2.36in x 2.36in x 1.57in)
tyle="max-width:650px;overflow:hidden;font-size:0;clear:both"> /piece /piece /piece /piece /piece /piece /piece 3D Printer Heated Bed Power Module Hotbed MOSFET Expansion Module Inc 2pin Lead With Cable for Anet A8 A6 A2 Ramps 1.4 Features: - Completely solve the hot bed power is too large and the load current issue
- Under the premise of normal cooling, it work stable under I(Max)=20A,
- The current must not exceed 20A while the process working
- If you need anything greater or equal to 15A this module is a must! For example, if your total power usage is 240W and you have 12V power supply, then it means at least 20A is needed (20X12=240W).
- This high power module helps your 3D printer equipped with the Chitu controller board (capable of max 15A) become even more powerful. With this add-on module to board lead the maximum current up to 25A.
- This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this)
Specifications: - Size: 6 x 5 x 3.1cm / 2.36 x 1.97 x 1.22"
- Mounting holes: 3.2mm diameter, for M3 screws.
- Distance betweeen holes: 54*43mm
- Very powerful MOSFET to withstand higher current than normal RAMPS or other 3D Printer controller can handle
- Voltage: 12V-24V
- Maximum current with active cooling: 210A
- This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this)
- Under the premise of normal cooling, it work stable under I(Max)=25A, the current must not exceed 25A while the process working
Package includes: - 1 x MOSFET Expansion Module
- 1 x Cable
-->
|