Reminder:All products in our store are shipped without instruction manuals. The transmitters have been matched before shipment and do not need to be paired again. Due to the different needs of each customer, our store can only provide a simple wiring reference diagram on the product details page. I`m sure I will connect it before buying, please don`t shoot if you are tangled!
One: product overview
The main function of the wide voltage 12-36v two-way wireless remote control switch is to control the on, off, conversion of electrical appliances, lamps and equipment switches and the requirements of various special control programs. There are special limit switches and manual control button wiring ports. This product is widely used in remote control water pump switches, wireless remote control machine switches, wireless remote control sockets, wireless lamps, and various wireless home appliance controls. It is a new type of intelligent switch, which can control one or more indoor devices. This product is based on international electrical practices and adopts advanced electronic circuit design at home and abroad, and its performance is stable and reliable. It has the advantages of being easy to use, safe and reliable.
Two: product details introduction and wiring reference diagram
![](https://ae01.alicdn.com/kf/S1ca42b6ed1704abe97367d8d6d203836n.png)
![](https://ae01.alicdn.com/kf/S78853bd49e7b4130bff2cba22f0f58c0D.jpg)
![](https://ae01.alicdn.com/kf/S3273b8f3274e482a8ae4cebfccb68a81R.png)
![](https://ae01.alicdn.com/kf/Sb42b915d3c554640a6ed1f145171dd15o.png)
Three: product parameters
1. Working voltage: DC12~36V wide voltage
2. Operating frequency: 315MHz, 433MHz
3. Product size: PCB board 75*58*15mm shell 95*62*29mm
4. Receiving sensitivity: -105dBM
5. Working mode: non-locking, self-locking, interlocking
6. Output signal: two-way switch signal can be output
7. Coding method: learning code
8. Working temperature: -10°C~+70°C
Four: Learn/Clear the Launcher Method
1. Learning methods
Press the learning key once, the indicator light flashes slowly, immediately press the "A" key of the transmitter, flash 6 times quickly and turn off, indicating that the "A" key is successfully learned, and the learning "B" key Press the learning key twice and the light flashes The method is the same as above (Note: The key value of the remote control without learning is used as the stop function in the "interlock" mode, the learning waiting time is about 6S, and the learning mode is exited immediately after the learning is successful, and the key is de-bounced.
2. Clearing method
Long press the learning button, the learning indicator is always on and wait for the 6S indicator to go out, indicating that the code is cleared successfully
Five: work mode conversion
Working mode selection button:
[Unlocking mode]; The three pins of L-S-T do not need to be short-circuited, the default is unlocking mode.
[Interlocking mode]; The two pins of S-T are shorted with jumper caps.
¡¼Self-locking mode¡½; Short-circuit between L-S pins with jumper caps
Six:Package Included
1 x Receiver (with cover)
1/2 /3x Transmitter
( no batteries inside)