Packaging Details
- Unit Type: set
- Package Weight: 0.500kg (1.10lb.)
- Package Size: 18cm x 10cm x 8cm (7.09in x 3.94in x 3.15in)
ow.productDescripti
Specification
Remote Control:
Working Volt: DC12V
Working Current: 30-40mA
Frequency: 315~433MHz
Encoding Type: Learning code
remote with a white shell, behind the battery hatch to facilitate battery replacement
A number of buttons, this Wireless Remote Control Switch is very suitable for the kind of the occasion which need a little controls more, such as street light control
This Wireless Remote Switch has sand table remote control, data, wireless input, intelligent home control, and other comprehensive controls
This Wireless Switches fully uses the resources of 2262 chip, four parallel data yards
This Wireless Remote Control Switch has sand table remote control, data, wireless input, intelligent home control, and other comprehensive controls
Control Switch System:
Operating Voltage: DC12V
Quiescent Current: 7 ~ 8MA
Operating Frequency: 315MHz (315 ~ 433MHz and other frequencies optional)
Receiver Sensitivity: -103dBm
Size:97mm*77mm*26mm
Output Status: Jog / interlock / self-locking
This Wireless Switches fully uses the resources of 2262 chip, four parallel data yards
This Wireless Remote Control Switch is very suitable for the kind of the occasion which needs a little control more, such as street light control
Output working way:
1. Self-lock ---connect the s1 with the cutting out cap.
2. Jog---the cutting-out cap is non-occupation, S1 and S2 do not connect either.
3.inter-lock---- Connect the S2 with the Cutting out cap,
Jog---- press one button is ON . loosen your finger on the same button is OFF .need one channel switch and one buttons remote control )
buttons remote control
Learning and remove method.
1. press the learning code .the indicator flash ,loosen your finger ,press any button of the remote control ,the indicator flash 2 times and off .it mean you learn it successfully .
2. it can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote control
3. remove/clean :press the learning button about 8 seconds , the indicator turn on to off , it means the information that you keep have been removed successfully .
Note:433mhz and 315 mhz are available ,315mhz will be sent out if there is no demand on frequency
package included
1*Transmitter + 2*Receiver
`;