The product does not include batteries because of shipping restrictions. If you
want to start the Bluetooth, bring your own battery.
And Without 2.4G USB adapter.
Latest features£º
Apple iOS iPadOS£º
IPhone device iOS system version newer than 13.0, iPad device iPadOS system version newer than 13.0.
Press Button B + Button PS/Home
The LED4 signal lights is flashing
Bluetooth pairing list found: PS4 DualShock 4 wireless controller
The LED4 signal lights up when the connection is successful.
Use the battery (Voltage range 3.7V~4.5V) to power the encoder board, use Bluetooth to pair and connect to your gaming device.
2, Charger and Battery
2.1 Charger
When using rechargeable batteries. Connect the USB cable to charge the battery.
The LED4 signal light is flashing when charging.
When the battery is fully charged, the LED4 signal light is always on.
2.2 Battery
The encoder is powered by a battery with a voltage in the 3.7-4.5V range.
The encoder will power off after 5 minutes of inactivity to save battery power.
Press the PS button to restart. The encoder will start with the last working mode.
When the battery power is almost exhausted, the LED4 signal light will flash quickly.
3, Power on and start
3.1, Bluetooth
Press the PS button to power on.
The encoder will start with the last working mode.
New Device Bluetooth Pairing:
3.1.1, Apple iOS iPadOS
IPhone device iOS system version newer than 13.0, iPad device iPadOS system version newer than 13.0.
PressButton B + Button PS/Home
The LED4 signal lights is flashing
Bluetooth pairing list found: PS4 DualShock 4 wireless controller
The LED4 signal lights up when the connection is successful
3.1.2, Android
Android device system version newer than 6.0.
PressButton B + Button PS/Home
The LED3 signal lights is flashing
Bluetooth pairing list found: Bluetooth Joystick
The LED3 signal lights up when the connection is successful
3.1.3, PC & Raspberry Pi
PressButton R1 + Button PS/Home
The LED1 LED2 LED3 signal lights is flashing
Bluetooth pairing list found: Bluetooth Joystick
The LED1 LED2 LED3 signal lights up when the connection is successful
3.1.4, Nintendo SWITCH
PressButton R2 + Button PS/Home
The LED2 LED3 signal lights is flashing
Bluetooth pairing list found: Bluetooth Joystick
The LED2 LED3 signal lights up when the connection is successful
3.1.5, PS3 & PS4
Connect PlayStation via USB cable
The encoder will automatically pair and connect with the PlayStation through Bluetooth.
The LED1 LED3 signal lights up when the connection is successful
3.2 Wired
The encoder will automatically recognize various devices when the USB cable is connected.
When working on a general-purpose device such as a PC, the default Xbox controller mode.
Press the PS button for 3 seconds, the device will switch to PS3 controller mode.
3, Turbo/Clear
Press Button A + Button Turbo/Clear to turn on the Turbo function.
When you press button A again, the encoder will send button A signal continuously. To simulate the effect of quickly clicking the button A.
Press Button A + Button Turbo/Clear again to turn off the Turbo function.
This function works for: Button A, B, X, Y, L1, R1, L2, R2, L3, R3, Select, Start.
4, Axis/ Point of view hat/ Rolation Switch
Now the joystick can play almost all games on all devices.
The joystick can be switched to a different direction stick.
Button Turbo + Button UP; (Default)
Joystick signal control Axis, D-pad mode. It works for most older games.
Button Turbo + Button Left;
Joystick signal control Point of View Hat, X-input mode.
Button Turbo + Button Right;
Joystick signal control Rotation, Not commonly used, but might be helpful at some point.
5. SOCD (Simultaneous Opposing Cardinal Directions)
SOCD means "Simultaneous Opposing Cardinal Directions." It is the physical actuation of cardinal directions that are separate and opposite to each other - ie, pressing Left and Right at the same time. This phenomenon is best known on all-button controllers, such as the Hit Box and Smash Box, but current controllers like the Dual-Shock 4 can do something similar with its cross-directional (Analog Stick and Dpad) inputs.
Reference link:
In different modes, when you press the directional buttons at the same time, it will follow different direction priorities.
Button SC (Prtsc) + Button A:
¡ç+¡æ=¡æ ¡é+¡è=¡è¡ç+¡é+¡æ=¡é
Press button left and button right in same time, the joystick output right signal.
Press button down and button up in same time, the joystick output up signal.
Press button left, button down and button right three button in same time, the joystick output down signal.
Button SC + Button B: (default)
¡ç+¡æ=None¡é+¡è=None¡ç+¡é+¡æ=¡é
Button SC + Button X:
¡ç+¡æ=¡æ ¡é+¡è=¡è ¡ç+¡é+¡æ=¢Ù
Button SC + Button Y:
¡ç+¡æ=None ¡é+¡è=¡è ¡ç+¡é+¡æ=¡é
Button SC + Button L1:
¡ç+¡æ=¡ç ¡é+¡è=¡è ¡ç+¡é+¡æ=¡é
6.Other
The encoder size: 65mm x 30mm.
Installation hole size: 60mm x 25mm.