|
aHR0cDovL2ZyZWVzaGlwLmNvLmty Item specifics - Type: Voltage Regulator
- Supply Voltage: 5V
- is_customized: Yes
- Model Number: NanoPi NEO
- Condition: New
Packaging Details - Unit Type: piece
- Package Weight: 0.12kg (0.26lb.)
- Package Size: 1cm x 1cm x 1cm (0.39in x 0.39in x 0.39in)
Packaging Details - Unit Type: piece
- Package Weight: 0.12kg (0.26lb.)
- Package Size: 1cm x 1cm x 1cm (0.39in x 0.39in x 0.39in)
ow.productDescripti NanoPi NEO,Allwinner H3 Development Board,Run UbuntuCore Description: Introduction The NanoPi NEO(abbreviated as NEO) is another fun board developed by FriendlyARM for makers, hobbyists and fans. Hardware Spec - CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz
- DDR3 RAM:512MB
- Connectivity: 10/100M Ethernet
- USB Host: Type-A x 1, 2.54 mm pin x 2
- MicroSD Slot x 1
- MicroUSB: OTG, for power input
- Debug Serial Port: 4Pin, 2.54 mm pitch pin header
- GPIO: 2.54mm pitch 36pin. It includes UART, SPI, I2C, IO etc
- PCB Dimension: 40 x 40 mm
- Power Supply: DC 5V/2A
- OS/Software: u-boot and UbuntuCore
Layout ![2](https://ae01.alicdn.com/kf/HTB18K38OFXXXXbJXpXXq6xXFXXXv/120472223/HTB18K38OFXXXXbJXpXXq6xXFXXXv.jpg?size=79157&height=365&width=619&hash=b5fdfb33e7744179bb269db7fae158ae) -
-
Pin# | Name | Linux gpio | Pin# | Name | Linux gpio | 1 | SYS_3.3V | | 2 | VDD_5V | | 3 | I2C0_SDA | | 4 | VDD_5V | | 5 | I2C0_SCL | | 6 | GND | | 7 | GPIOG11 | 203 | 8 | UART1_TX/GPIOG6 | 198 | 9 | GND | | 10 | UART1_RX/GPIOG7 | 199 | 11 | UART2_TX/GPIOA0 | 0 | 12 | PWM1/GPIOA6 | 6 | 13 | UART2_RTS/GPIOA2 | 2 | 14 | GND | | 15 | UART2_CTS/GPIOA3 | 3 | 16 | UART1_RTS/GPIOG8 | 200 | 17 | SYS_3.3V | | 18 | UART1_CTS/GPIOG9 | 201 | 19 | SPI0_MOSI/GPIOC0 | 64 | 20 | GND | | 21 | SPI0_MISO/GPIOC1 | 65 | 22 | UART2_RX/GPIOA1 | 1 | 23 | SPI0_CLK/GPIOC2 | 66 | 24 | SPI0_CS/GPIOC3 | 67 | - USB/Audio/IR Pin Description
-
-
NanoPi-NEO | NanoPi-NEO V1.1/V1.2 | Pin# | Name | Description | Pin# | Name | Description | 1 | VDD_5V | 5V Power Out | 1 | VDD_5V | 5V Power Out | 2 | USB-DP1 | USB1 DP Signal | 2 | USB-DP1 | USB1 DP Signal | 3 | USB-DM1 | USB1 DM Signal | 3 | USB-DM1 | USB1 DM Signal | 4 | USB-DP2 | USB2 DP Signal | 4 | USB-DP2 | USB2 DP Signal | 5 | USB-DM2 | USB2 DM Signal | 5 | USB-DM2 | USB2 DM Signal | 6 | GPIOL11/IR-RX | GPIOL11 or IR Receive | 6 | GPIOL11/IR-RX | GPIOL11 or IR Receive | 7 | SPDIF-OUT/GPIOA17 | GPIOA17 or SPDIF-OUT | 7 | SPDIF-OUT/GPIOA17 | GPIOA17 or SPDIF-OUT | 8 | MICIN1P | Microphone Positive Input | 8 | PCM0_SYNC/I2S0_LRC | I2S/PCM Sample Rate Clock/Sync | 9 | MICIN1N | Microphone Negative Input | 9 | PCM0_CLK/I2S0_BCK | I2S/PCM Sample Rate Clock | 10 | LINEOUTR | LINE-OUT Right Channel Output | 10 | PCM0_DOUT/I2S0_SDOUT | I2S/PCM Serial Data Output | 11 | LINEOUTL | LINE-OUT Left Channel Output | 11 | PCM0_DIN/I2S0_SDIN | I2S/PCM Serial Data Input | 12 | GND | 0V | 12 | GND | 0V | -
-
Pin# | Name | Description | 1 | MICIN1P | Microphone Positive Input | 2 | MICIN1N | Microphone Negative Input | 3 | LINEOUTR | LINE-OUT Right Channel Output | 4 | GND | 0V | 5 | LINEOUTL | LINE-OUT Left Channel Output | -
-
Pin# | Name | 1 | GND | 2 | VDD_5V | 3 | UART_TXD0 | 4 | UART_RXD0 | - Note:
-
- SYS_3.3V: 3.3V power output
- VVDD_5V: 5V power input/output. When the external device’s power is greater than the MicroUSB\'s the external device is charging the board otherwise the board powers the external device. The input range is 4.7V ~ 5.6V
- All pins are 3.3V, output current is 5mA
- For more details refer to the document:
Dimensional Diagram ![4](https://ae01.alicdn.com/kf/HTB1tGtiOVXXXXXMXXXXq6xXFXXXP/120472223/HTB1tGtiOVXXXXXMXXXXq6xXFXXXP.jpg?size=51206&height=378&width=487&hash=46646f2ffaa10f5f84e915c649d58f3e) For more details refer to the document: Pacakge Included: 1 * NanoPi NEO ![1](https://ae01.alicdn.com/kf/HTB1kvgNOFXXXXbkXVXXq6xXFXXXH/120472223/HTB1kvgNOFXXXXbkXVXXq6xXFXXXH.jpg?size=43459&height=331&width=425&hash=0d634e192601b8ba04b9a23dc5764871) ![379777668_174](https://ae01.alicdn.com/kf/UT8QO1IXiFaXXagOFbXc/120472223/UT8QO1IXiFaXXagOFbXc.jpg) -
-
-
`;
|
|
|
|
|