|
Packaging Details - Unit Type:piece
- Package Weight:0.024kg (0.05lb.)
- Package Size:13cm x 13cm x 4cm (5.12in x 5.12in x 1.57in)
Packaging Details - Unit Type:piece
- Package Weight:0.024kg (0.05lb.)
- Package Size:13cm x 13cm x 4cm (5.12in x 5.12in x 1.57in)
tyle="overflow: hidden; clear: both; font-size: 0px;"> Below item is powered by eletechsup Ltd . Product Name: with Enable DC-DC Step-up Boost Converter 3V 3.3V 3.7V to 5V Voltage Regulate for Arduino Breadboard stm32 LCD Packing list: 1 PCS 6W DDEN12MA_5V 2.6V-4.5V TO 5V DC DC Boost Converter Module Description: Input voltage DC 2.6 ~ 4.5V,output DC 5V±3% Maximum output : 5V/1.3A(See the table below for details) DC DC Boost Converter Module working frequency 1MHZ. Up to 95% Efficiency (usually is 75%-92%) Quiescent current : Turn on output 210uA,Turn off output 5uA. Operating temperature range : -40~+85 Degrees Celsius Storage temperature range : -65~+150 Degrees Celsius 2.54mm pin pitch,for Arduino UNO MEGA2560 MCU Development Board Breadboard friendly. Size(Does not include pin) : 20 x 15 x 6MM Weight : 1.8g Protection : Over current protection(OCP) Over voltage protection(OVP) Short circuit protection(SCP) Over temperature protection(OTP) Pin description: Pin description: Vi : Input positive(+) En : Output enable, Connect to GND turn on output, Not connected(Or Connect to Vi) turn off output This pin can also be controlled by MCU, low level turn on output, high level Turn off output G : Input and Output negative(GND/-) Vo: Output positive(+) Applications Battery powered equipment Instrumentation, multimeter Small power motors PTZ Camera webcam Toy car boat Model aircraft power bank LED Lighting Mobile phone charger LCD Displays Handheld Devices Attention : This is a DC-DC voltage converter module,Must be noted when using: 1 Input voltage can not be greater than the maximum input range 2 Output power can not be greater than the maximum load for a long time 3 Input power must be greater than the output power, because the power consumption of the module itself Q & A: Q : Why output voltage is less than the nominal voltage A : Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low -->
|
|
|
|
|