Note: All products in our store do not carry batteries. Batteries are for display only
Instructions for the charger PD2
1. Charger Specifications and Functions:
1. Adopt DC12V1A(nominal) input, two-slot independent charging and microcomputer management system;
2. The biggest highlight of this charger is that it can charge the battery regardless of polarity!
3. There are three levels of charging current 0.5A /1.0A/2.0A, the default 0.5A charging, long press the corresponding button to select the charging current;
4. When charging, LCD can display the channel CH and the charging current, voltage, time, capacity and battery type Li-Fe 3.20V /
Li-ion 3.70V /Li-ion 3.85V (IMR); The total charging current of the two slots does not exceed 2A, that is, when one of the slots is charged with 2A current, and then the battery is charged in the other slot, the front 2A current will fall back to 1A current to charge; When the battery is FULL, the LCD displays full.
5. Automatic identification of lithium (Li-Ion 3.70V) battery and nickel metal Hydride (Ni-MH) battery, manual selection of lithium iron phosphate (3.20V) and
Li-Ion 3.85V battery;
6. 0V voltage activation function, 1.65-2.20V can not be charged (but there will be a trickle of activation current charging).
7. Has multiple safety protection functions such as overcharge, overdischarge, short circuit and so on at the same time can intelligent automatic identification of bad battery;
8. Charging mode: constant current and constant voltage.
2.keys and display:
1. Key (Mode) : Two keys, each of which controls a slot. Within 5 seconds after the battery is energized and put into the battery, click the Mode key of the corresponding slot to select the type of charging battery, and long press the Mode key to select the charging current. 5 seconds after entering the charging state; You can`t switch the battery type during the charging process, but you can click the button to light the backlight and long press to switch the current.
2. LCD: After the charger is connected to the power supply, the LCD display will display null for about 2 seconds. When a battery is detected, the LCD displays the corresponding slot number, battery voltage and current, and the battery type symbol blinks (nickel-metal hydride/nickel-cadmium 1.2V no battery type symbol blinks). 5 seconds later, it enters the default identification to charge the battery. At this time, the charging display "%" symbol blinks, indicating that the charging is in progress, and END is displayed when the charging is completed.
3. electrical technical parameters:
1. Input power: DC 12V 1A
2, output voltage: DC 4.20V for Li-Ion
DC 4.35V for IMR
DC 3.65V for LiFePO4
DC 1.48V for NiMH/NI-Cd
3, output current (optional) : Li-Ion/IMR/LiFePO4:2000mA*1(only one)/1000mA*2/500mA*2
NiMH/NiCd: 500mA
4, constant current/constant voltage charging, cut-off current: <100mA;
5, no-load standby current: <15m A
Note: All products in our store do not carry batteries. Batteries are for display only