Ç÷¹À̽º Ȧ´õ
Features:
Raspberry Pi Camera Module
---Raspberry Pi Camera Night version
---5 megapixel OV5647 sensor
---CCD size : 1/4inch
---Sensor best resolution : 1080p
---4 screw holes
---Used for attachment
---Focal Length : 2.1
---Diagonal angle : 160 degree
---Provides 3.3V power output
---Dimension: 25mm x 24mm
Packing List:
Raspberry Pi Camera ¡¿ 1 pc
Note: This is night version camera, due to it doesn`t have IR cut function, when use it in daytime, the pictures will show pink. If you mind, pls do not buy. Thank you.
Packing List
Packing List
1.1pcs*camera
2.1pcs *15cm flex cable
3.1pcs* white box
4.1pcs* Anti-static PE bag
How to use the camera in Raspberry Pi board?
1.Please ensure the raspberry Pi system is the newer version, and open the camera function.Type the command: sudo raspi - config and check the camera function of the fifth.The picture below:
How to use the camera in Raspberry Pi board?
1.Please ensure the raspberry Pi system is the newer version, and open the camera function.Type the command: sudo raspi - config and check the camera function of the fifth.The picture below:
3. Then the system return to the interface itself. Choose the ¡°Finish ¡° , it will restart:
4. After the raspberry pi system restart , you can use raspberry pi camera now.
If you want to take photo, you can run the command : raspistill
For example,input: raspistill ?t 2000 -o 1.jpg
-t: ( the time of waiting to take the photo ,5000 is five seconds). ? o 1.jpg (1.jpg is command of file)
Tip:
Hardware connection:
1. Soft cable, 90-degree vertical connector, HDMI port next to it. When connecting the contact side facing the HDMI interface.
2. Remove the protective film before using the lens
3. bare boards, pay attention to ESD damage, guard against static electricity!
Software:
1. RPi firmware and raspi-config has been updated to the camera, do a apt-get update; apt-get upgrade;
2. raspi-config, select the camera, start RPi firmware in the camera driver, then reboot
3. Use the command-line program raspivid and raspistill operating camera to capture video clips or images
4. The captured video clip needs to play with mplayer