|
Packaging Details - Unit Type:Set
- Package Weight:0.12kg (0.26lb.)
- Package Size:20cm x 15cm x 6cm (7.87in x 5.91in x 2.36in)
Packaging Details - Unit Type:Set
- Package Weight:0.12kg (0.26lb.)
- Package Size:20cm x 15cm x 6cm (7.87in x 5.91in x 2.36in)
align="left" border="0" cellpadding="2" cellspacing="0" style="width:100%;"> Anntem wireless remote control switch 433mhz rf transmitter and receiver kit dc3.5v 3.7v 9v 12v universal Battery power Mini small switch module starter small motor Forward+Reverse+Stop steering | | Product Description | The controller converts the positive and negative directions of the output port according to the remote command. Achieve steering and switching of the motor. Switching control Press the button ▲, the Motor Forward,Press Button ■ is Stop. Press the button ▼, the Motor Reverse,Press Button ■ is Stop. Please don\`t hold control "▲ "and "▼" button at the same time. Control motor, when the motor need to switch by forward inversion, need remote shut down, and then inversion of control. | | Product detailed parameters | Receive controller parameters | 1. Working voltage: DC 3.7V to 12V (wide voltage universal) 2. Standby current : About 0.2 mAh 3. Working current:About 6 mA 4. Maximum load current: less than 0.4A (less than 4 watts of equipment) 5. Working frequency: 433mhz 6. Output voltage: Consistent with the output supply voltage 7.Port spacing:2.54pin 8. Size: 0.8in*0.14in*0.15in 9.Receiver sensitivity: greater than -105dBm 10.Working temperature: -40 ° C + 80 ° C 11.model:JN-MOTOR | | rf Remote transmitter parameters | 1. Remote distance: Barrier-free 20 meters or more 2. Working voltage: DC 12V 3. battery model: 23A 12V 4. Frequency: 433mhz 5. Working current: about 10 mAh 6. Code type: EV1527 / learning code 8. Size: 2.46in*1.51in*0.55in 9.model:MW-SXT | | Product situation | Visual environment, control distance is about 20 meters.,RF signal can penetrate the wall. This product uses a power saving program. It is very suitable for battery power. 1000mA capacity battery, standby can be more than 6 months. Turning into hibernation when standby can be very energy efficient.Because of this dormant program,Button time must be greater than 0.8 seconds. If you push the button too fast, you may occasionally lose control. Scope of use:Coil, motor steering, electromagnet, positive and negative pole steering,Power supply positive and negative switching function and switch function 1. output voltage=The input power supply voltage(3.5V to 12V universal) 2. when you use, Module will be a bit hot, That is normal, Don\`t worry 3. Starting current is less than 400mA, More than a limited amount of current, Will be power-off protection. | Product detail picture display | | Shenzhen Anntem Technology Co., Ltd. | Shenzhen Anntem Technology Co., Ltd. was established in 2010, the company specializes in electronic product development, customization, production, processing, wireless remote control switch, smart home, WIFI switch and other consumer electronics. We are willing to cooperate sincerely with you. If you have any questions, please contact us. | | | -->
|
|
|