Packaging Details
- Unit Type:piece
- Package Weight:0.05kg (0.11lb.)
- Package Size:20cm x 40cm x 10cm (7.87in x 15.75in x 3.94in)
![2](http://ae01.alicdn.com/kf/HTB1e9i9dpkoBKNjSZFEq6zrEVXap.jpg)
![4](http://ae01.alicdn.com/kf/HTB1cKF8dpooBKNjSZPhq6A2CXXaF.jpg)
![P1010783](http://ae01.alicdn.com/kf/HTB1l0X_mrSYBuNjSspiq6xNzpXad.jpg)
The hood is a common photographic accessory set in front of the camera lens. It has the following functions:
1. In the case of backlight, side light or flash photography, it can prevent the entry of non-image light and avoid haze.
2. In the light and side light photography, the scattered light around can be avoided into the lens.
3. When lighting or photographing at night, you can avoid the ambient interference light entering the lens.
4. It can prevent accidental damage to the lens, or avoid the accidental contact of the lens surface, and in a certain extent, protect the camera from wind and snow.
The hood is widely used for backlighting photography and generally avoids glare. However, glare is still possible if the light source is close. At this point, you can use your hand to block the hood on one side of the light source. If the glare is eliminated, you should observe clearly from the viewfinder.
Its functions are as follows:
1. In the case of backlight, side light or flash photography, it can prevent the entry of non-image light and avoid haze.
2. In the light and side light photography, the scattered light around can be avoided into the lens.
3. When lighting or photographing at night, you can avoid the ambient interference light entering the lens.
4. It can prevent accidental damage to the lens, or avoid the accidental contact of the lens surface, and in a certain extent, protect the camera from wind and snow.
Package:
1 x ET-67 Lens Hood
![](http://freeship.co.kr/images/notice0.png)
-->