¹«¼± ÀÌ¾î ¹öµå ¸ð´ÏÅÍ ½Ã½ºÅÛ, ¹«¼± À̾îÆù ¸ð´ÏÅÍ ±Í ¸®ÅÏ ½Ã½ºÅÛ 518 ? 554MHz 110 ? 240V
Feature:
1. It`s reliable RF connection coverage up to 100m,and it has a signal?to?noise ratio of up to 90 dB provides clear and complete audio.
2. No complicated menus, but simple volume and mixing control buttons, and transmitter and receiver are all metal shell, sturdy and durable.
3. There is no limit to the number of S3 receivers that can be used at the same frequency.
4. Small and portable, the wireless earbud monitor system has three different receiving modes for you to choice.
5. Each frequency band can use up to 8 sets of wireless monitoring systems at the same time.
Specification:
Item Type: Wireless Earbud Monitor System
Material: Iron Shell
Frequency Range: 518-554MHz
Headphone Output Interface: 3.5mm Stereo Jack
Transmitter Power Supply: DC9V/500mA
Receiver Working Time: More than 12 Hours
Receiver Battery: 2xAA Batteries (Not Included)
Operating Range: Approx. 100m/109.4yd (Open Environment without Obstruction)
RF Transmit Power: <10nW
Dynamic Range: 90dB
Harmonic Distortion: <1% (1KHz, ¡¾20KHz Frequency Deviation)
Frequency Response: 40Hz-18KHz
Headphone Output Power: 65m (32 OHM)
Voltage: 110-240V
Package List:
1 x S3 Transmitter
1 x S3 Receiver
1 x Power Adapter
1 x Manual
1 x Antenna
2 Pairs x Ear Caps
1 x Headset
How to use:
1. Send the instrument and microphone signals (stage guitar/bass/drum/microphone vocal signals) from the stage to the mixer or PA system.
2. Connect the mixer output interface to the S3 transmitter input interface.
3. Set the S3 receiver and S3 transmitter to the same frequency, the receiver can receive the audio signal of the transmitter.
4. Each performer can use the S3 receiver to monitor the corresponding audio.