Feature:
1. Easy to carry: Small size, easy to carry, very suitable for home or professional audio switching.
2. Support digital conversion mode: Insert the optical fiber or coaxial cable into the interface of the input end, and then connect the audio, power amplifier and other equipment at the output end with a 3.5mm or RCA cable to realize digital-to-analog conversion audio output.
3. Easy to operate: Turn on the power, after turning on the power, the blue indicator will light up and enter the Bluetooth-compatible mode. Long press the button to switch the digital fiber coaxial to the analog audio output mode, the red light is on.
Description:
Name: Bluetooth-compatible Receiver and Audio Converter
Model: B36
Frequency response range: 10Hz-20kHz output
Signal-to-noise ratio: >110dB
Distortion + Noise: <0.02%
Bluetooth-compatible version: 5.1
Output impedance: 75 ohms
Decoding chip: Bluetooth-compatible 5.1
Output: RCA/3.5mm
Effective distance: 10 meters
Support: A2DP/AVRCP
Input: Optical / Coaxial
Operation function: turn on the power, the blue indicator light will be on after turning on, and enter the bluetooth mode.
Long press the button to switch the digital fiber coaxial to analog audio output mode, the red light is on
Key Function:
1. Bluetooth-compatible receiving mode.
A. Power on the device, the blue light flashes, and wait for Bluetooth-compatible pairing at this time.
B. Connect the output end to the AUX/RCA line and the audio amplifier and other equipment.
C. Turn on the Bluetooth-compatible function on the mobile phone or tablet, search for Bluetooth-compatible devices, select "B36" in the Bluetooth-compatible list and click to connect the device.
D. After the connection is successful, the blue indicator light is always on.
2. Digital fiber coaxial conversion to analog audio.
A. Power on the device, at this time the Bluetooth-compatible light is on, long press the middle button to switch to DAC mode, the red light is long on, and the optical/coaxial switch is switched by long pressing the button.
B. Insert the optical fiber or coaxial line into the interface at the input end, and then connect the output end with a 3.5mm or RCA line and connect it with audio, power amplifier and other equipment to realize digital-to-analog conversion audio output.
Note: The default power-on mode of this product is Bluetooth-compatible receiving mode.
Packing list:
Host x 1
Audio cable x 1
Optical fiber cable x 1
USB cable x 1
Instructions x 1
Note:
1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks.