Model: 10-13S for lifepo4 and li ion battery use
common Version : common port for charge/discharge
We can customize any PCB from 3S to 32S lithium batteries with different current.
Note: The BMS can not be connected in series or parallel.
Packing list: BMS Balancing wires and Manuel;
Balanced BMS board can not add accessories;
Only Smart BMS board can UART RS485 CAN LCD Battery Power display etc;
If order bms with BT UART, then will send bms with bluetooth and UART USB;
Otherwise, it is only balanced type.
Uart RS485 CAN LCD Screen and Battery Power Panel are available to buy sperately.
Plz check this Link for Accesorries as below.
BMS Technical Tutorial Website which you may need:
Plz ensure correct wiring before using,
the BMS need to be activated before using;
By charging battery through bms or by press power button on battery light board if you have.
Any question on using after receiving plz contact us.
Tips:
Plz check the paper Manuel before wiring and connect as manuel guide!
Plz charge the battery through bms so bms would be activated!
Plz do not charge the smart bms by smart charger !!!
The DALY BMS can not be packed in series or parallel!
1. Overview
¡ßWe can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer etc.
¡ßThe main functions are: over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection etc.
¡ßAccording to the customer request we can develop PCM in different sizes and structures.
¡ßBMS manufactured by high quality Mos and IC imported . Keep your battery long cycle serivce life time.
2. Advantage
¡ßUse top quality (A-level) protective integrated circuit IC, from the solution of Seiko of Japan.
¡ßStrong load ability, constant discharge current 80A 100A 120A 150A 200A, use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help cooling.
¡ßIC itself has power balancing function. The circuit is simple and reliable.
¡ßTypical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable.Long time short circuit of the load won¡¯t affect the PCB and the battery.Temperature protection during charging and discharging.
¡ßExtreme low power consumption. The consumption of the whole device is less than 50uA.
¡ßPCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.