PL2303GS USB Uart TTL 3.3V to Micro USB Adapter Converter Cable Windows CE 7 8 10 Android Support
Material: PVC outer jacket
Cable: 28AWG*4C, OD3.8 Bare Copper
Cable length: ?1.0M 1.8M optional, other length can be customized
Connector A: USB 2.0 type A male
Connector B: Micro USB B male
Chipset: PL2303GS
Pinout A version: 1-5V, 2-TX, 3-RX, 4&5-GND
Pinout B version: 1-5V, 2-RX, 3-TX, 4&5-GND
PL2303GS USB to Serial Bridge Controller
The PL2303GS is a low cost and high performance USB-to-Serial Bridge Controller. The PL2303GS provides a convenient small-factor solution for connecting an RS232-like full-duplex asynchronous serial device to any USB host. Prolific provides highly compatible drivers that could simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready.
By taking advantage of USB bulk transfer mode and large data buffers, PL2303GS is capable of achieving higher throughput compared to traditional UART (Universal Asynchronous Receiver Transmitter) ports. The flexible baud rate generator of PL2303GS also could be programmed to generate any rate between 1 bps to 12 Mbps.
Features
Full Compliant with USB Specification v2.0 (Full-Speed)
On-chip USB 1.1 transceiver and 5V to 3.3V regulator
On-chip 96MHz Clock Generator
Supports OTPROM (One-Time Programmable ROM) for USB device descriptors. OTPROM can be programmed directly through USB port.
Each IC has unique ID(for Serial Number)
Full-duplex transmitter and receiver
5, 6, 7,or 8data bits
Odd, Even, Mark, Space, or None parity mode
1, 1.5,or 2 stop bits
Parity error, frame error, and serial break detection
Programmable baud rate from 1bps to 12Mbps
Independent power source for serial interface
Works with existing PC COM Port software applications
1024-byte bi-directional data buffers (768-byte receive/256-byte transmit)
Royalty-Free Driver Support
Windows 10, 8, 7, Vista, XP, (Microsoft Certified WHQL Drivers)
? ? ? ? - Windows Update Driver installation available in Windows 7 and above (32/64-bit)
Windows Server 2003, 2008, 2008 R2, 2012, 2016, 2019
Windows Embedded Industry, Point-of-Service (WEPOS), and POSReady
Windows Embedded Compact, Windows Embedded CE, Windows CE
Mac OS X
Linux OS 3.18 and above (Support Linux 5.5 in-box driver and above)
Android 3.2 and above