Intel Core Processor X9100 detailed parameters
General information |
Type |
|
Market segment |
Mobile |
Family |
|
Model number ? |
|
CPU part number |
|
Frequency ? |
3067 MHz |
Bus speed ? |
1066 MHz |
Clock multiplier ? |
11.5 |
Package |
478-pin micro-FCPGA 1.38" x 1.38" (3.5 cm x 3.5 cm) |
Socket |
Socket P |
Introduction date |
|
End-of-Life date |
Last order date is March 25, 2011 Last shipment date is September 30, 2011 |
Price at introduction |
$851 |
S-spec numbers |
Part number |
Production processors |
|
|
|
AW80576ZH0836M |
+ |
+ |
|
Architecture / Microarchitecture |
Microarchitecture |
Core |
Platform |
Montevina MontevinaPlus |
Processor core ? |
Penryn |
Core steppings ? |
C0 (SLB48) E0 (SLGE7) |
CPUID |
10676 (SLB48) |
Manufacturing process |
0.045 micron |
Data width |
64 bit |
The number of CPU cores |
2 |
The number of threads |
2 |
Floating Point Unit |
Integrated |
Level 1 cache size ? |
2 x 32 KB 8-way set associative instruction caches 2 x 32 KB 8-way set associative write-back data caches |
Level 2 cache size ? |
Shared 6 MB 24-way set associative cache |
Multiprocessing |
Uniprocessor |
Extensions and Technologies |
MMX instructions
SSE / Streaming SIMD Extensions
SSE2 / Streaming SIMD Extensions 2
SSE3 / Streaming SIMD Extensions 3
SSSE3 / Supplemental Streaming SIMD Extensions 3
SSE4.1 / Streaming SIMD Extensions 4.1 ?
EM64T / Extended Memory 64 technology / Intel 64 ?
NX / XD / Execute disable bit ?
VT / Virtualization technology ?
TXT / Trusted Execution technology
|
Low power features |
C1/AutoHALT, C1/MWAIT, C2, C3, C4 (with Enhanced Deep Sleep) and C6 core states
Stop Grant mode ?
Sleep mode ?
Deep Sleep mode ?
Deeper Sleep mode ?
Enhanced Deeper Sleep mode ?
Deep Power-Down state ?
Dynamic FSB Frequency switching ?
Enhanced SpeedStep technology ?
|
Integrated peripherals / components |
Integrated graphics |
None |
Electrical / Thermal parameters |
V core ? |
1V - 1.275V |
Minimum/Maximum operating temperature ? |
0°C - 105°C |
Minimum/Maximum power dissipation ? |
7.45 Watt (Deep Power-Down mode) / 70.87 Watt |
Thermal Design Power ? |
44 Watt |
Notes on Intel Core 2 Extreme X9100 |
Bus frequency is 266 MHz. Because the processor uses Quad Data Rate bus the effective bus speed is 1066 MHz
Processor operates at 0.85 Volt - 1.1 Volt in Low Frequency mode
Processor operates at 0.8 Volt - 1 Volt in Super Low Frequency mode
|
Must see before installing cpu:
1. Remove the original CPU, clean the dust on the fan and heat sink, clean up the original silicone grease remaining on the heat sink, and clean up the hardened silicone grease!
2. Insert the newly purchased CPU in the correct direction, and apply a layer of silicone grease on the top of the CPU. Don`t apply too much, just enough to fill the gap between the top of the CPU and the heatsink. (A4 paper is as thick as 3-4 sheets, taking a small piece of silicone grease in a needle tube as an example, it is suitable to squeeze 2-3 small grids of silicone grease)
3. Reinstall the heat sink, first press the heat sink with your fingers and move it up and down, left and right, so that the silicone grease inside is evenly dispersed and the air is exhausted, and then follow the order of numbers marked on the fixing screws on the heat sink (or diagonally) Tighten them one by one, and then unscrew a screw each time a few turns. Do not screw a certain screw to the end at a time, and rotate it one by one until it is fixed and balanced.
Note: After changing the CPU, if you find that the CPU temperature is too high, or the temperature is unstable from high to low, please carefully check the above 3 items, and check whether the quality of the silicone grease is too poor. Most problems can be solved this way.
1. All products are 100% original and tested before shipment.
2. When you place an order, we will ship it to you as soon as possible within three days.
3. If there is any problem with the product, we will replace it for free within 15 days after receipt, lifetime warranty, please rest assured to buy
4. Your satisfaction and positive feedback are very important to us. If you are satisfied with our goods and services, please leave positive feedback and 5 stars.
5. If you have any questions about our goods or services, please contact us before leaving negative feedback. We will do our best to resolve any issues and provide you with the best customer service.
I wish you a happy shopping