Pay Attention :
1.This product has 4 types of heating pads, the difference is that the plugs are different! There are European standard EU plugs, American standard US plugs, Australian standard plugs, and British standard plugs. Please choose the product correctly, otherwise you will receive the wrong product! ! If you have any questions, please feel free to consult customer service
2.Voltage: 250 w,220 v (EU,AU,UK plug ), 110 v (US plug),Please note the difference
Product Description:
-Well waterproof performance, fast temperature rising, temperature uniformity,High thermal efficiency, well toughness
-Conform to the American UL94 level V0 flame resistant standard
-Easy to use, safe service life for ten years, not easy aging
-With European standard plug
Material: Silicone rubber + fiberglass cloth
Voltage: 250 w,220 v (EU,AU,UK plug ), 110 v (US plug)
Using range: All kinds of automobile fuel tank, water tank, storage battery, anti-freezing heat insulation
Product with double-sided adhesive on the back, can be directly stick on the heated products, the highest heat resistance temperature to 200¡É, will never fall off
-Use pressure-sensitive adhesive to stick it on the flat and smooth artifacts
-The maximum service temperature of pressure sensitive adhesive: 150¡É Continuous temperature, 230¡Éinstantaneous temperature. Power density is less than 0.9 W/c §³
-Silicone rubber heater with pressure sensitive adhesive should be used in half a year after processing, otherwise it will influence on the performance of the glue using
-The electric heating device must pay attention to use, its working temperature should be less than 240 ¡É, the continuous use instantaneous does not exceed 300 ¡É.
-when the work temperature less than 240 ¡É, the current density is up to 3 w/c §³
-Paste the type installation conditions, allowed working temperature less than 150 ¡É
-Working voltage selection with high power high voltage, low power low voltage for the principle, special needs can be exceptions.