Feature
TMC2208 V1.2
1.TMC2208 single-axis stepper motor drive chip, power tube built-in drive current 1.4A peak current 2A, voltage range 4.75V-36V, 256 subdivision.
2. Current dynamic adjustment technology, can save 70% of the energy, StealthChop mute technology.
3.The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing.
4. Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market.
TMC2130V1.1
1.Standalone mode (v1.1) = JUMPER2 connect, 8pins
2.Driver capability up to 1.2A(RMS) continus coil current
3.Step/dir interface with up to 256 micristeps
4.SPI interface or CFG pins for configuration
5.Motor voltage: 5.5-45V
6.Logic voltage: 3.3-5V
TMC2130V1.2SPI
1.TMC2130-V1.2 is a new module that is optimized and upgraded to solve the problem that older drivers cannot choose to use the SPI working mode.
2.SPI working mode of TMC2130 V1.2 can directly select driver current, driver subdivision and other parameters through firmware, which makes these parameters more accurate.
3.Using sequexternal sequencers, it can greatly reduce the workload of the chip and effectively avoid problems such as running deviation, losting step and fault caused by the overload of the chip.
4. This module is similar to TMC2100, which will generate a lot of heat energy when it working. Therefore, heat sink and heat dissipation fan must be added to cool it down during the use, which reduce the occurrence of losting steps and running deviation)
Parameter
Product Display