Introduction£º
The 3x1 device is a SPDIF/Toslink Switch 3×1. You can switch any one of the three digital toslink audio signal to the one toslink audio output. At same time, it can convert the digital signals into analog L/R audio output and headphone output .the device supports AC3/DTS and other digital audio format decoding. It can be used to audio decode the DVD, Blue-Ray DVD ,ps3,x36OBOX,HD player, PC and other similar signal generator source.
Features£º
It Converts Optical SPDIF Toslink Coaxial to Analog L/R RCA + 3.5mm Jack Stereo Audio + Toslink Output. Toslink Output Supports 2.0CH PCM, 5.1CH Dolby Digital, DTS Audio.
The Design of 3 Port Optical SPDIF Toslink are Enables to Connect Multiple Devices Simultaneously. Free to Switch your HDTV Xbox DVD Blu-ray PS3 PS4. ( Come with a 6.5ft/2m OD 4.0 Toslink Cable )
Supports RCA + 3.5mm + Optical Audio Sync Output for Connecting Amplifier 3.5mm Headphone Soundbar.
Supports Last Time Working State Memory When Power Off.
No Need for Any Software and Drives, Suitable for HDTV PS3 XBox DVD PS4 Sky HD Blu-ray Home Cinema Systems AV Am
Specifications£º
Input ports: 3*Optical
Output ports: 1*Optical;1* L/R analog audio; 1*3.5mm headphone
Support all optical audio formats: Dolby AC3, DTS, THX, HDCD, PCM ETC.
Automatic identify input digital audio signal format and output stereo analog audio.
3-Ports SPDIF/TOSLINK inputs, Supports SPDIF/TOSLINK output, L/R analog audio output and 3.5mm headphone output
Power supply: DC5V
To improve our customer¡¯s experience, we posted the following solutions to the common problems.
A: Buzzing Noise
1. Please try using a high quality fiber optic cable or a RCA cable with high quality gold plated interface and a shielded function to connect the toslink audio decoder.
2. Please use the original 5V 1A plug to power the decoder. (Do not plug the USB cable directly into the TV`s USB port to power the decoder)
B: Do Not Work
1. Some TVs or game consoles need to set the audio output mode to SPDIF mode output in the device system.
Setting: Device Homepage -- System Setting -- Image and Sound -- Voice Setting -- SPDIF -- ON.
2. Please select the correct source input. If the input source is connected to ¡°Input1¡±, you need to set the input channel to ¡°Input1¡± to work properly.