Packaging Details
- Unit Type: set
- Package Weight: 5.000kg (11.02lb.)
- Package Size: 21cm x 20cm x 20cm (8.27in x 7.87in x 7.87in)
Order:
1 pcs ADC225 24V or 12V(leave a message to us)
1 pcs ESD5111
1PCS ADC225 12V OR 24V
ADC225 Series Engine Actuator with 12V or 24V
The 225 Series electric actuator is a rotary output, linear torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail safe operation by forcing the actuator to the fuel shut off position when the actuator is de-energized. This design combines fast operation, multi voltage usage, wider rotation angles, and proven reliability. The actuator can operate directly from 12 and 24 volt battery supplies.
The speed of operation of the actuator is typically faster than competitive units, thus it provides more stable and rapid response to transient conditions.
Applications include most block pumps, with or without mechanical governors, distributor type pumps, and medium sized carbureted engines. The 25 degrees of rotation
Performance
Available Torque.............................................................Max 2.2 lb-ft (2.7 Nm)
Maximum Operating Shaft Angular Travel....................25 ±1 degree CW/CCW
PoWer Input
Operating voltage...........................................................................12, 24 VDC
Normal Operating Current...........................................................3 A at 12 VDC
........................................................1.5 A at 24 VDC
Maximum Current-Continuously Rated........................................8 A at 12 VDC
.........................................4 A at 24 VDC
Environmental
Ambient Temperature................................... -65°F to 200°F (-54°C to +95°C)
Relative Humidity............................................................................up to 100%
All Surface Finishes...............................Fungus proof and corrosion resistance
Physical
Dimensions................................................................................See Diagram 6
Weight...................................................................................8.25 lb. (3.75 kg)
Mounting.....................Any Position, electrical connector at the top preferred
Reliability
Vibration........................................................................Up to 20 G, 50-500 Hz
Testing........................................................................................100% Tested
+1PCS ESD5111
ESD5111 series speed controller is a closed-loop control of the entire electronic design, it\'s instantaneous load changes quickly and with precision control in response to engine speed when connected to the match and the implementation of e-speed magnetic sensor signals can be Control of a wide range of engines.
It is designed to be highly reliable, the engine can withstand the surrounding area within the range of electromagnetic interference.
In the design, installation and a simple pre-adjustment, including the transfer rate and adjustable idle for assistance or for multiple special-purpose machine input, as well as to prevent reverse battery voltage, the transient voltage pulse, the actuator short-circuit fault And the loss of power or speed sensor signal of the security protection
Technical specifications:
Speed stability better than ± 0.25%
Speed range 1KHz ~ 7.5KHz
The largest thermal stability of ± 1%
DROOP adjustment for the location of the smallest 15Hz ± 6Hz / per ampere load current changes Location of the largest 400Hz ± 75Hz / per ampere load current changes
External regulation of the speed of ± 200Hz (external 1KΩ )
AUX input sensitivity 148Hz / 1V., ± 10Hz., Impedance 1MΩ
IDLE adjustment 160 ± 20Hz ~ rated speed of 95%
10V maximum output current 20mA
Environment:
Operating temperature range -40 ~ 85
Working humidity range of 95% of the largest
Storage Temperature -55 ~ 90
Shock 20-100Hz 500mm/Sec.
Power input:
12V supply voltage and the 24V DC battery system
Ground negative polarity
Power consumption of 50mA
Implementation of the current minimum continuous 2.5A; Biggest 10A
Speed sensor signals 0.5 ~ 120 RMS
Note: The performance parameters in the frequency when measuring 4000Hzv