|
Packaging Details - Unit Type: piece
- Package Weight: 0.060kg (0.13lb.)
- Package Size: 12cm x 10cm x 9cm (4.72in x 3.94in x 3.54in)
Packaging Details - Unit Type: piece
- Package Weight: 0.060kg (0.13lb.)
- Package Size: 12cm x 10cm x 9cm (4.72in x 3.94in x 3.54in)
ow.productDescripti - Module name:One Channel Multifunctional Relay(30A)
- Charging voltage:DC 12V
- Quiescent current:Within 10uA
- Relay:original SongLe relay ,AC 220V/30A ,DC 30V/30A.normally open & normally closed
- Isolation mode: Optocoupler,it is completely isolated when the relay is charging alone.
- Level trigger mode : TTL level high /low trigger(optional)
- Button trigger mode:Touch-button switch,each time press the relay,the mode will change.
- Indicator : The power indicator light is green while the pull-on indicator light is red .
- Installation : 3 3mm screws
- Connection :Terminal Non-welding output
- Size : 50*34*24mm(L*W*H)
Operating Instruction : - 1.Module charging and trigger signal input interface : V- : charging negative; L: low trigger signal input; H: high trigger signal input; V+: charging positive.
- 2.Jumper for high/low trigger signal choose :You can choose high trigger or low trigger by jumper cap. H represents high trigger;L represents low trigger.
- 3.Jumper for isolation / non-isolation choose: V1/G1 is module charging positive /negative; V2/G2 is relay charging positive/ negative. When you apply non-isolation , V1,V2,G1,G2 are short circuit by jumper cap ,relay charging can get power from module directly .When you apply isolation , just remove two jumper caps ,then relay charging can get power from V2,G2 separately.
- 4.Switch : Each time press switch,the relay\'s mode will change..
- 5.External switch expanding interface : When the touch switch is not needed on board ,this interface can be used for external touch switch .
- 6.Electronic switch enable interface(SW_ON): Electronic switch is invalid when the jumper cap is taken down for normal relay module use. The self-locking function will be open when you put on jumper cap for self-locking switch use .
- 7.Relay output terminal: 3 terminals are connected with normally open ,normally closed and intermediate point of relay separately. You can choose suitable connection according to control need .
Package Included: - 1 x 1 Channel Multifunctional Relay(30A)
We accept alipay(ESCROW), it support Credit Card, Western Union, TT etc. Other payment method please do contact us. All items will ship with tracking number. Delivery time depend on the carrier. Any questions please do contact us, communication is the best way to solve the problem. 3 month guaranteed exchange.Refund will be offered if stock is not available. 1 Year warranty for non-deliberate damage defective items. Please tell us what the defect is and your order number if you request exchange or warranty. We appreciate for your positive feedback and 5 stars. No DSR left is better than 1-4 stars for us. Please do contact us before you leave Negative/Neutral feedback or open dispute. We will reply as soon as possible. Thanks. `;
|
|
|
|
|