Packaging Details
- Unit Type: set
- Package Weight: 0.300kg (0.66lb.)
- Package Size: 18cm x 10cm x 8cm (7.09in x 3.94in x 3.15in)
ow.productDescripti
AC220V 10A 1CH Wireless Remote Control Switch System 1*Receiver + 3 *cat eye Transmitters for Appliances Gate Garage Door
he product is electronic design and manufacture of single remote control switch 220 volts USES 10A relay, can use load higher power electronics;Can choose resistance capacity step-down or power supply module decompression;Can learn more remote control, and each remote control all buttons can learn, can be a remote control multiple switch, a switch can also be multiple remote controller, and can be implemented at short welding plate, interlock, or the workings of a self-locking;In order to facilitate the use of customer, this kind of controller can be charged dry contact output and output.Operation is simple and flexible supporting any combination;
Mainly used in lamps and lanterns, electric door, window, hoisting equipment, elevator control and security industry and other fields.
Note: the product has two kinds of output modes, 1. The output load voltage is AC220V, A, B solder connection;2. No voltage output,, A, B solder connection.Please order indicate the need what kind of pattern, if not sure, I will be no voltage output safe mode by default, thank you
RF wireless remote control system
Receiver (switch)
Working Voltage : AC180-240V
Output Current : ≤10A
Working Frequency : 315MHZ/433MZH( Frequency can be customized)
Output way : Jog .Inter-lock .Self -lock
Code type :Learning code
Circuit board size: 46 mm*38.5mm*17mm
working/output way
1.jog model:not connect
2.self-lock model:\'\'T\'\'connect
3.inter-locking model:\'\'L\'\' connect
Learning Method:
Press the learning button3 seconds, the indicator light off .then you press any buttons of the remote control to transmite signal . it means studying successfully when the indicator flash 3 times until the indicator light on.
Remove code:
press the learning button about 8 seconds , the indicator turn on to off to on , it means the information that you keep have been removed successfully .
Remote control (transmitter)
Remote Control:
Operating Voltage: DC12V
Operating Current: 30MA
Operating Frequency: 315/433MHz
Frequency Distance: 20-200M
(please notice that is the ideal distance without any block and signal interfere , it would rise and fall about 10%-50% with the block and signal interference ).
Note: 433mhz and 315 mhz are available ,315mhz will be sent out if there is no demand on frequency
3.Package Included:
1 x Receiver(with cover)
3 x Transmitter (with battery)
`;