|
Packaging Details - Unit Type: piece
- Package Weight: 0.2kg (0.44lb.)
- Package Size: 15cm x 12cm x 4cm (5.91in x 4.72in x 1.57in)
Packaging Details - Unit Type: piece
- Package Weight: 0.2kg (0.44lb.)
- Package Size: 15cm x 12cm x 4cm (5.91in x 4.72in x 1.57in)
ow.productDescripti The item has 1 infrared remote and 1 pcs of sample cards come with.If you need more remotes,please let me know. CB-A access control instruction 1:Parameter Voltage | DC 9-12V | Current | 60mA~80mA | Swiping Range | 5~15cm | Operation temperature | -40~60 | capacity | 5000 Users | Card type | compatible EM4100/4102 | 2:Wiring J1 Wire No. | Wire color | Symbol | Description | 1 | Red | +12V | +12V | 2 | Black | GND | ground | 3 | Yellow | NC | Relay?s Normal Close | 4 | White | NO | Relay?s Normally Open | 5 | Green | COM | Relay common port | 6 | Blue | OPEN | Exit button(low level available) | J2 Wire No | Wire color | Symbol | Description | 1 | Green | 5V | 5V | 2 | White | GND | GrounD | 3 | Black | DATA | DATA | J3-B Wire No | Wire color | Symbol | Description | 1 | Red | TX1 | Antenna pin1 | 2 | Black | TX2 | Antenna pin2 | 3:Short-circuit terminals description 4 PCB diagram 5:Operating Instructions How to make a management card - Power off,S2 Short circuit to 0,then,Power-on.Red and Green Flash alternately
- Read two cards,Green LED flashs.
- the first card is management card and the second one is deleting card.
How to Enroll user cards - Read management card,the green LED is flickering
- Read unregistered cards one by one
- Read the management card again to complete the operation.
How to delete user cards - Read the deleting card,Red LED flickering.
- Read the user cards those should be deleted one by one.
- Read deleting card again to complete the operation.
How to delete all the user cards - Read the deleting card,Red LED flickering.
- Read the management card.
- Wait for 5 Seconds until Green LED on,meantime all the user cards deleted.
6.Infrared operation: Enter the operation mode:Press 1234 CALL Enroll cards:Press 1,Green Flickerring,swipe new cards one by one Delete cards:Press 3,Green Flickerring,swipe cards to be deleted one by one Enroll cards by card number | Press 0--Green light--PressXXXXXXXX CALL (XXXXXXXXis the top ten card number of the printed card) | Delete cards by card number | Press 2XXXXXXXXXX CALL, (XXXXXXXXis the 10-digit card number the is printed on the card | Delete all the cards | Press 4 CALL-- a few seconds later -- beep -- deleted. | Door normally open | Press 5 CALL | Door normally close | Press 6 CALL | Open door for once | Press 7 CALL | Change the Password | Press 8XXXX CALL | Exit operation system | Press EXIT or Automatically exit if 10s without any operation | Picture ID Size:34*86MM |
`;
|
|
|
|
|