24V 120W power adapter for 24V passive POE PDs, for MikroTik and 24V UBNT, Openmesh.
48V 120W adapter for most IP camera, 802.3af/at WiFi AP. 12V 1A for 12V IP camera.
This Passive PoE injector, whis a simple, cost-saving and convenient equipment for IP camera, IP phone, WiFi Access point, powered onver Ethernet cable.
The PoE injector can power PDs 100 meters far away from power source with safety, low-cost and easy installation.
This PoE injector is passive PoE but compatible with all IEEE802.3af/at powered devices, while power pins 4/5(+), 7/8(-) midspan. Because 802.3af/at standards support power pins 4/5V+, 7/8V- and 1/2V+, 3/6V-.
As you know, POE switch is expensive, while POE injector+normal switch= POE switch, which share the same function, but POE injector+mormal switch are much more economical.
(For most IP cameras, about 6 watts per camera, 8 watts if they have PTZ or IR features. If "12, POE" cameras, it still need 48V Powered Over Ethernet.)
DC plug or 3 Pin wire input, 16 Lan port, 16 POE port, shielded
For IP camera, IP phone, WiFi, Access point, etc.
Over current, over voltage, short circuit protection.
FCC CE RoHS certified.
Rack-mountable
LED indicator:
POWER OFF --Off 0 to 400mA --Green >400mA -- Red
The 16 port PoE panel is used 10/100M Ethernet, The upper Rj45 sockets is form “LAN/Switch/PC ”
1/2&3/6 are transmitting data . The under RJ45(power+data) socket is to deliver data and power:
1/2&3/6 transmitting data, 4/5(+)&7/8(-)forpower.Passive POE iscomposed of 12 set of Rj45sockets ,
one 60V DC power jack and . Input power requests160W or more AC TO DC power converter.
The input dc hole diameter is 2.1mm and the other end OD id 5.5mm. And the other Each socket
provides protection against short overflow (current protection 650mA+15%-15%). The sum total output
power must be lower than the MAX input power of AC-DCpower converter. If not, it is necessary to
consider taking higher AC-DC power converter.There commended formula for AC-DC power converter
is 10W per RJ45 set (1 set = 2 x RJ45sockets). For example, 16 x10W = 160W for 16 port Passive
PoE panel .The configuration size of panel is 1U (height), 19” (width) and 25mm(thickness), as is
available to answer market demand and convenient to beinstalled directly.