Packaging Details
- Unit Type: Set
- Package Weight: 0.12kg (0.26lb.)
- Package Size: 12cm x 12cm x 10cm (4.72in x 4.72in x 3.94in)
le=" margin: 0px; padding: 0px; border: 0px; font-size: 13px; line-height: 16.9px;font-family:Arial,Helvetica,sans-serif; vertical-align: baseline; color: rgb(0, 0, 0);">
433 Mhz Universal Wireless Remote Control Switch AC 110V 220V 1CH Relay Receiver Module and 2 Transmitter 433Mhz Remote Controls
Technical Data:
Input Power:AC 85V-250V
Standby Current:<5MA
RF Frequency:315M or 433M
RF working mode:superheterodyne
Receive sensitivity: >97dbm
Transmitting distance: 20-50m ( open space)
Decoding mode: software decoding
Remote storage:25pcs
Support remote type: Learning code 1527code, Fixed code(Rolling code can be design)
Working mode:Momentary, Toggle, Latching
Wiring type:fixed terminal
Output Terminal :NO , NC , COM
Dimension of PCB:53.8*31.2mm.
Wiring diagram 1:
NO: Output , normal open;
COM:Output , common ;
NC: Output , normal close.
Package Included:
Receiver module (KR2201-4 ) * 1pcs ( include Shell );
433MHz ?Remote Control * 2pcs ( include Battery );
Free Gift: Cross screwdriver * 1pcs.
Attention Please:
Every parcel only get 1 pcs cross screwdriver as a free gift whatever how many you order,
If you need more cross screwdriver or the flat head screw driver, please order the following links:
About Working mode:
Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Clearing the code :
Push the learning button on the receivers for 8 times , the codes will be cleaned .
After clearning the code, all the remote control cannot work any more.
Learning the code :(momentary)
Push the learning key on the receiver once time, it comes into momentary setting mode .
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button , LED indicator on the receiver board will flash then come off .
After 3 seconds, the LED indicator will be on again , learning successfully .
Learning the code : ( Toggle )
Push the learning key on the receiver twice time , it comes into toggle setting mode
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash then come off.
After 3 seconds , the LED indicator will be on again , learning successfully .
Learning the code :( Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for ¡°ON¡±, the second time learnt for ¡°OFF¡±.
For example : button A = ON , button B = OFF
Push the learning key on the receiver triple time , the LED (on the Receiver)will blink 3 times. When the LED is on, press the button of the remote control(You want to let it learn), Push the remote button A, LED flash for 3 times . Push the remote button B, Led flash for 3 times . After 3 seconds , the LED indicator will be off , Learning to succeed.
A = ON , B = OFF .
NOTE: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .
?
/piece
/piece
/piece
/piece
/piece
/set
/piece
/set
-->