Packaging Details
- Unit Type:piece
- Package Weight:0.3kg (0.66lb.)
- Package Size:15cm x 12cm x 9cm (5.91in x 4.72in x 3.54in)
; 2019 new professional sports smart watch IPx7 Waterproof remote WIFI camera fitness tracker for outdoor sport watch pk Q8 fit 2
attention:
Thank you for choosing this new sports camera watch. The watch safety level is IP67. You Can be used with outdoor sports, rain, wash hands and other minor and short time soak water, But can not be used for swimming and diving. And please do not block the MIC hole.
1、Functional Operation and instruction:
A Key:Turn on/off/Pause
Long press A key to turn on, The red/blue light long time bright ,after that bule light will flash once/second into the recording mode, At the same time of wi-fi hot open by default, and then enter the APP operation. Long press A key to turn off,the light off.
Short press A key pause the video and save it. Short press again to start the video
B KEY :Take photo
Short press B key to flash red light once to take a picture and save.
C KEY
When WIFI is on,short press C key,The blue light flashes 5 times/second, then WIFI hot is off. The watch starts recording . When WIFI is off, short press C key, the red light flashes 5 times/second, the WIFI hot opens, into the WIFI standby mode, and then can enter APP operation.
D key: lighting
Short press this key, strong light - weak light - strong flash - close
2、close / open indicator light:In working status, long press PHOTO key to close / open blue indicator light.
3、Charging: when charging, the yellow light will be on, and the yellow light will be off after charging.
4、Recording during charging: Connect the USB charger, and the watch will automatically open to working. Now you can do all sorts of instructions. After the power cut, the wath will automatically shut down the video and save it. If you only need to charge, you can short press ON/OFF key to pause
5、Reset: when the device crashes, long press ON/OFF key and PHOTO key to reset.
6、WIFI work mode: WIFI work mode is divided into LAN WIFI and network WIFI. When the watch WIFI is turned on, if the watch has not been connected to LAN WIFI and network WIFI before, the blue light will flash and watch enter the recoding video.
If the watch has been connected to LAN WIFI and network WIFI before, the watch will automatically look for the last connected network WIFI and connect to enter. If the network WIFI connection is not successful, automatically enter the LAN WIFI working mode after 30 seconds
7、Working state light:
Working state light: | Blue light | Red light | Yellow light |
Wifi off and recoding | Once /second | off | off |
WIFI off and not recoding | Long light | off | off |
Lan WIFI no recoding and no TF card | off | Long light | off |
Lan WIFI recoding | off | Once/second | off |
Network WIFI no recoding and no TF card | Long light | Long light | off |
Network WIFI recoding | Once/second | Once/second | off |
Finding network | off | Quick to shine | off |
Charging | | | Long light |
Charging over | | | off |
Take photo | | Flash one time | |
APP operation instruction:
APP QD cord see use manual
1、 APP install
(1)Apple and android phones scan the qr code and download and install it.
(2)Apple system can search the \`eyesCam\` download and install in the apple store. Android system can be in the "Google play" search for \`eyesCam\` to download and install.
2、LAN WIFI connection(Point to point P2P direct)
(1)In the no network environment, turn on the watch,When the red/ blue lights are on, the blue lights flash once per second, and then the red lights flash once per second, Then use your phone to search the watch WiFi hot(XY-XXXXXX) and connect(Search the WiFi Hot need 30 seconds)
(2)Open the APP \`eyescam\` and click the icon,Then follow these steps:
select the IPCAM Not been connected to the router NEXT Add Device Device Password √ Connect to the router NO
Note: device initial password (aa888888)
(3)The APP interface will display the Processing......,, and jump to the camera list interface after about 5 seconds, Prompt to successfully add the device camera. and green Online is displayed at the upper left corner of the screen, indicating that the WIFI hot is successfully connected.
3、Remote network WIFI connection
(1)When the mobile phone connects to the network, open the APP \`eyescam\` and click the add button. Then select the IPCAM and select the Been connected to the router You can select local search/ scan qr code and enter manually, three ways to add.
(2)Select the IPCAM, then select the Not been connected to the router,,and enter the WIFI wireless network configuration after selectingYes from "Yes/No"interface. In the WIFI wireless network list, click the WIFI wireless network to be connected and input the WIFI wireless network password; Then click on the Connet , and jump to the camera list interface after about 5 seconds, indicating that the device camera was successfully added. (restart if you can\`t connect)
Note: if you enter the wrong password or network problem cannot connect to the networks, the device will automatically enter the LAN WIFI working mode after 30 seconds
-->