Packaging Details
- Unit Type:piece
- Package Weight:0.5kg (1.10lb.)
- Package Size:10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
t;
Product characteristics: 1. Adopt Lattice original plant design scheme to ensure stable and reliable use; 2. Support wide target voltage 1.5V-5V; 3. USB power supply, without external power supply alone; 4. Support all LATTICE development environments (LSC ISPVM, LATTICE DEMIOND, LATTICE ISPEVER, and LATTICE PROGRAMMER); 5. Supports Lattice full-range FPGAs, such as SC(M)/XP/XP2/ECP2(M)/ECP3/ECP5(G)/MachXO/MachXO 2/MachXO 3/ICE40 series, etc. 6. Support Lattice CPLD series, such as 1000/2000/4000/ispMACH series, etc. 7. Support JTAG, internal FLASH, SPI FLASH and other programming modes; 8. There is no need to install the driver separately. It directly supports various versions of Diamond/ispLever 6.x/7.x/classic/ispVM drivers. 9. It has current-limiting input and ESD protection measures to ensure that the download line is complete. 10. Use the Lattice official 2*5 Pin spacing 2.54 mm JTAG interface; 11. Support operating system Windows 2000/XP, Windows 7/8/10, Linux, etc. Download Line: 1. SCLK/TCK: Connect with SCLK/TCK pin of chip; 2. GND: The Downloader is connected with the common ground of the target board by two or four pins, which need to be connected with the ground of the target board when using. 3. MODE/TMS: Connect with MODE/TMS pin of chip; 4. GND: The Downloader is connected to the common ground of the target board with its internal 2 or 4 pins, which need to be connected with the ground of the target board when using. 5. SDI/TDI: Connect with SDI/TDI pin of chip; 6. VCC: It is used to check whether the target board connected by the Downloader is powered on, not to supply power to the target board. The official downloader does not have the ability to supply power to the target board, which needs attention. 7. SDO/TDO: Connect with SDO/TDO pin of chip; 8. INTI: When downloading and debugging some chips, INTI pins need to be connected, not every chip needs to be connected. 9. TRST: When downloading and debugging some chips, they need to connect TRST pins, not every chip needs to connect. 10. ispEN/Enable/PROG: Some chips need to be connected to ispEN/Enable/PROG pins when downloading and debugging, not every chip needs to be connected.