10A
The power supply is a kind of high-efficiency voltage automatically regulator.
Whatever is the input voltage value,the output voltage can be maintained constant.
For example,set the output to 12V, then the variation of the input voltage in the range of 5-32V,
the output voltage in the 12V invariant.
This module has a perfect protection function, and can be widely used in notebook power,
vehicle power supply, solar charge etc..
Advantages:
The input uses replaceable fuse to protect power supply and equipment;
The whole electrolysis use patch, low resistance, high frequency capacitor
,to make the ripple down to the freezing point;
Constant voltage, constant current, under voltage protection (MPPT is more suitable for solar charging)
The output has error indicating lamp,it will light when the output voltage drift too serious,
short circuit and other fault;
Inductor use iron silicon aluminum, 0.8 double winding, generate less heat.
Parameters:
Input voltage: DC5-32V;
Output voltage: DC1V-30V continuously adjustable; the default 12V shipment
Output current: 10A (MAX) ,long term within 8A
Output power: 80W, peak 130W, more than 80W please strengthen heat dissipation
Output ripple: 50mV (12V turn to 12V, 5A measured)
Short circuit protection:YES
Input reverse connection protection: No
Output prevent reverse connection protection: No
Operating temperature range: -45 ~ +85 ¡Æ
Size: 77.6*46.5*15mm (including the bottom surface of the radiating aluminum)
Package included:
1 x LTC3780 DC 5V-32V to 1V-30V 10A Automatic Step Up Down Regulator Charging Module
14A
Feature:
1. Wide input voltage range: 5 - 32V
2. Output voltage: can be adjusted between 2 - 24V(Also can choose fixed voltage (2 ~ 24V can be choose), please explain when you order.Default shipping is adjustable
3. Continuous Output Current: 12A, maximum 14A (input 14V, output 12V).
4. Use the advanced synchronous rectification, the conversion efficiency of up to 98%
5. Operating Frequency: 200KHz
6. Output over-current, short circuit protection, output short circuit is not afraid even end, the circuit will automatically protect
7. Inputs with 15A fuse, Cadogan a security measure
8. Chip with overheat protection, over-temperature automatically stop working
9. Input undervoltage protection, to stop working when the input voltage is lower than 4.5V
10. No input reverse polarity protection, input and output reversed will burn, must be connect in right position.
11. The soft-start function to ensure the power process without overshoot voltage
12. Enable direct control of the output voltage switches, straightforward ground to close the output voltage, the module goes into sleep mode. Not connected (floating) opens output.
13. Inputs and outputs are used LC filter, and the use of large-capacity high-frequency ceramic capacitors and low-impedance electrolytic capacitors from Taiwan, ensuring very low input and output ripple. Input 14V, output 12V10A Ripple ¡Â 30mVp-p. Especially in the automotive application conditions, does not interfere with other devices
14. Full load temperature rise: 50 ¡Æ, delivery has been installed heatsink to enhance heat dissipation
15. Industrial operating temperature range: -45 ~ +85 ¡Æ
16. Volume: 85X48X25mm (length X width X height)
17. Connection: Terminal Type
Typical output current and power( ambient temperature 25 degree , open air natural )
Application examples:
1.Power supply for vehicle equipment, the car will be unstable and noisy of 12V, converted to a stable, clean 12V output, to the car MP3, MP4, GPS, media players, cell phones, computers and other equipment powered vehicle.
2.DIY an adjustable DC power supply, 12V input connected to a power supply, the output voltage can be freely adjusted between 0.8 and 24. Can be used for maintenance of the power supply can also be used for a variety of laboratory, simple, cost-effective, suitable for all types of electronic enthusiasts.
3.Notebook powered car for the instability of the car and noisy 12V, voltage boost to the books needed, such as 16V, 19V, 20V.
Notes:
1.Before buying products, please friends carefully read the information we provide first
2.Electronic DIY requires a certain expertise and ability, please be sure to familiarize yourself with the parameters and wiring modules, etc., with caution, to avoid damage to the input and output reverse polarity caused by human factors, etc.