Note
the zigbee relay require zigbee gateway hub,so the the relay can be add in ewelink app or tuya smart app or smart life app.
Use For
1.Remotely give a pulse signal to turn on/off Lights,Lamps and other home appliance.
2.Remotely give a pulse signal to turn on/off Garage Door,Door Access
3.Remotely give a pulse signal to control DC Motor,AC Motor to Forward and reverse
The RF433 remote controller don`t include battery:27A 12 V
The picture of battery is in the end of the page
Note
The relay is passive output, No matter the power you supply in the input, the output don`t have any power voltage,You also need to supply power in output.
The power supply in the input just can make PCB board work.if you do not supply power in output, the connectted device can`t work.
Three Working Modes
1.Self-locking mode:
each channel could be switched on/off seperately manually or controlled by the APP.You could turn on or turn off all channels in the same time.
2.Interlocking mode:
Switch on any channel , other channels will be switched off automatically
3.Inching mode:
Switch on one channel ,the channel will be automatically closed after 0.5 seconds.Other channel is same as the channel.
The inching time is 0.5 seconds
How to Change the Work Mode
If you need to chage the working mode,you need to press the mode button.
How to change the inching time
If you need to change the inching time, you need to press the mode button to enter into self-locking mode,
The inching time only avaIlable in self-locking mode.
The time range is 0.5--3600 seconds
Feacture
¡¼Two Input Ports¡½
You could choose USB 5V port or the screw terminal port to supply power in the input to make the pcb board board work.
¡¼Dry Contact/Passive Output¡½
No matter how many power you supply in the input, the output don`t have any voltage
(Except that the input and output share the same power supply)
If you do not supply power in output port, the connectted home appliance can`t work, you also need to supply power in output.
¡¼Timer¡½
The connectted home appliances can be automatically turned on/off according to the time schedule.
Each channel can set different time schedule.
Function
¡¼APP Remote Control¡½
Require Tuya Zigbee Hub. You can check the working state of the device in Tuya APP anywhere and anytime.
¡¼RF433mhz Control¡½
The device can be controlled by the RF433mhz Remote Controller.
¡¼Mobile Phone Control¡½
Require Tuya ZigBee Hub ,when you go outside or at home, your smart phone could control the device by 2.4Ghz WIFI or 2G/3G/4G Mobile Network.
¡¼Voice Control¡½
Require Tuya Zigbee Hub, you could voice control the device by Alexa/Google Assistant.
Work with Tuya Zigbee Gateway Hub
It require Tuya zigbee gateway hub,so you can add the device in Tuya or Smart life APP
By Tuya zigbee gateway hub,It can be as the sub-device of the Tuya zigbee hub in Tuya or Smart life APP
By Tuya Zigbee gateway hub,the device can be connect to Alexa or Google assistant in Tuya APP (Zigbee hub is required).
You could voice command the connectted device,such as lights/lamps
By Tuya zigbee gateway hub, you could remote control the module in Tuya/Smart life APP.
You could set a time schedule to turn on/turn off the device
3.1.Inching mode
3.2.Self-locking mode:
3.3.Interlocking mode:
Switch on one channel ,the channel will be automatically closed after 0.5 seconds.Other channel is same as the channel.
The inching time is 0.5 seconds
(you can change the inching time range on the APP but the inching time only available in self-locking mode and don`t available in the inching mode)
Inching mode:Can be use for RF433 Remote Controller/Garage door
How to Change the Inching Time
Each channnel can be switched on/off seperately manually or controlled by the APP.
You also can turn on or turn off all channels in the same time.
Self-locking mode:Can be use for many lights.
.
Switch on any channel , other channels will be switched off automatically
Interlocking mode can be use for DC/AC Motor,becuase only one motor allow to run each time.
Wiring Diagram for lights
Wiring Diagram for RF433 Remote controller
Wiring Diagram for DC Motor
Only one motor can run each time,so you need to set the interlocking mode if you connect to many motor at the same time.
Wiring Diagram
for AC 85-250V input Wifi Relay
![](https://ae01.alicdn.com/kf/S36b06b99061f46429cf2cc06f965cebaw.jpg)
RF433Mmhz Control
How to pair the RF433 remote controller with the WIFI module?
1.Long Press the RF433 pairing button of the wifi module for 4 seconds,and wait until the blue led indicator turn on
2. Quickly press any key of RF433 remote controller, and then you can pair the device with RF433 remote controller successufully
How to clear the pairing between RF433 remote controller and the device
Press the RF433 pairing button for 10-15 seconds, and wait until the blue led indicator turn off